ROMO Series

ABOUT
ROMO Series

Hollow-Shaft Rotary Piezoelectric Motors

The ROMO Series is a hollow-shaft rotary piezo motor small enough to sit on a penny, built for space-constrained designs where every cubic millimeter counts. Running on ultrasonic standing-wave excitation of a piezoceramic resonator, ROMO delivers a 30 µrad minimum step with ≥4 mNm stall torque — no gearbox, no magnets, no coils. And because it draws zero current at rest, it generates no heat and doesn’t drain your battery just sitting idle between moves — while still responding in under 30 µs the instant you command it.
KEY FEATURES
Performance and
Key Advantages
Hollow shaft
2.5 mm I.D. (~11.5 mm O.D.), for routing wires, fiber, or light straight through the rotor axis
Sub-30 µs response
starts and stops faster than a stepper motor can take its first step
Zero holding power
draws no current at rest, unlike a DC or stepper motor
≥4 mNm stall torque
in a body as small as 3.5 g (plastic) to 5.2 g (metal, with encoder)
Resolution
30 µrad (open-loop) 6.1 mrad minimum step (closed-loop)
Power Supply
5–7.5 V DC, depending on driver configuration
HOW IT WORKS
Principle of Operation

US Patent Number 12,143,036

The ROMO rotary piezo actuator operates based on a US patented technology. Electrical excitation of its piezoceramic body, or resonator, induces simultaneously two independent longitudinal and bending ultrasonic standing waves in two perpendicular directions. This action generates elliptical vibrations at the resonator’s center, resulting in rotary motion of the motor, which is passively in contact with the resonator body.
SPECIFICATIONS
ROMO Series Motor Specifications
ROMO
Open Loop Rotary Piezo Motor

Hollow Shaft Rotary | Plastic & Metal Enclosures | No Encoder

Hollow-shaft rotary piezoelectric actuator, open-loop PWM control. Available in plastic (ROMO-P) or machined anodized aluminum (ROMO-M) enclosure.
MOTOR SPECIFICATIONS
Power Supply Voltage 7.5 V DC
Stall Torque ≥ 4 mNm
Self-Braking Torque ≥ 5 mNm
Actuator Response Time < 30 µs
Max Speed > 600 rpm
Minimum Angular Step 30 µrad
Angular Backlash 30 µrad
Angular Hysteresis 30 µrad
Frequency Response 4 kHz
Operating Temperature -20 °C to 80 °C
Maximum Axial Load 200 g
Maximum Radial Load 200 g
Moment of Inertia 29.2 g·mm²
Max Current over velocity range 300 mA
Rotor Runout ≤ 50 µm
DIMENSIONS & WEIGHT
Actuator Dimensions (no shaft)13 × 18.7 × 8.15 mm
Actuator Weight3.5 g / 4.0 g
Driver PCB Dimensions28 × 28 × 9.6 mm
Driver PCB Weight4.3 g
ORDERING INFORMATION
Model Enclosure Encoder Part Number Kit Number*
ROMO-M Metal No ROMO-M012-0370-0000 ROMO-M012-0371-0000
ROMO-P Plastic No ROMO-P011-0370-0000 ROMO-P011-0371-0000
ROMO-E
Rotary Piezo Motor with Encoder

Hollow Shaft | Plastic & Metal Enclosures | With Encoder

Identical to ROMO base motor with factory-fitted magnetic encoder. Encoder signal output enables closed-loop control via your controller. Plastic (ROMO-E-P) or anodized aluminum (ROMO-E-M) enclosure.
MOTOR SPECIFICATIONS
Power Supply Voltage 7.5 V DC
Stall Torque ≥ 4 mNm
Self-Braking Torque ≥ 5 mNm
Actuator Response Time < 30 µs
Max Speed > 600 rpm
Minimum Angular Step < 30 µrad
Encoder Resolution (after quadrature) 1,024 ppr
Minimum Controlled Angular Step 6.1 mrad
Uni-directional Repeatability 6.1 mrad
Angular Backlash 30 µrad
Angular Hysteresis 30 µrad
Frequency Response 4 kHz
Operating Temperature -20 °C to 80 °C
Maximum Axial Load 200 g
Maximum Radial Load 200 g
Moment of Inertia 29.2 g·mm²
Max Current over velocity range 300 mA
Rotor Runout ≤ 50 µm
DIMENSIONS & WEIGHT
Actuator Dimensions (no shaft) 13 × 18.7 × 9.15 mm
Actuator Weight 4.2 g / 5.2 g
Driver PCB Dimensions 28 × 28 × 9.6 mm
Driver PCB Weight 4.3 g
ORDERING INFORMATION
Model Enclosure Encoder Part Number Kit Number*
ROMO-E-M Metal Yes ROMO-M012-1370-0000 ROMO-M012-1371-0000
ROMO-E-P Plastic Yes ROMO-P011-1370-0000 ROMO-P011-1371-0000
ROMO-E-CL
Rotary Piezo Motor System with Closed-Loop Software

Hollow Shaft | Plastic & Metal Enclosures | With Encoder

Fully integrated closed-loop system. Combines the ROMO-E encoder motor with PMC’s dedicated closed-loop driver PCB and Python API software. Position and velocity commands via USB. Plastic or anodized aluminum enclosure.
MOTOR SPECIFICATIONS
Power Supply Voltage 5.0 V DC
Stall Torque ≥ 4 mNm
Self-Braking Torque ≥ 5 mNm
Actuator Response Time < 30 µs
Max Speed > 600 rpm
Minimum Angular Step < 30 µrad
Encoder Resolution (after quadrature) 1,024 ppr
Minimum Controlled Angular Step 6.1 mrad
Uni-directional Repeatability 6.1 mrad
Angular Backlash 30 µrad
Angular Hysteresis 30 µrad
Frequency Response 4 kHz
Operating Temperature -20 °C to 80 °C
Maximum Axial Load 200 g
Maximum Radial Load 200 g
Moment of Inertia 29.2 g·mm²
Max Current over velocity range 300 mA
Rotor Runout ≤ 50 µm
DIMENSIONS & WEIGHT
Actuator Dimensions (no shaft) 13 × 18.7 × 9.15 mm
Actuator Weight 4.2 g / 5.2 g
Driver PCB Dimensions 28 × 28 × 9.6 mm
Driver PCB Weight 4.3 g
ORDERING INFORMATION
Model Enclosure Encoder Part Number Kit Number*
ROMO-M Metal No ROMO-M012-0370-0000 ROMO-M012-0371-0000
ROMO-P Plastic No ROMO-P011-0370-0000 ROMO-P011-0371-0000
MOTION CONTROL
Motion Control & Electronics

Three driver tiers, matched to how much control you need:

Open-loop
(RED driver)

PWM, UART, or I²C control, no position feedback. Works with any ROMO-P/M or ROMO-E-P/M motor. Choose this if your system already has its own positioning logic, or you don’t need closed-loop feedback at all.

Closed-loop
(BLUE driver)
Encoder feedback processed onboard, controlled via PMC’s Python API over USB. Works with ROMO-E-P/M motors only. Choose this if you want position/velocity commands in, and correct motion out, with no external controller.
I²C multi-axis
(either RED or BLUE)
Daisy-chain up to six driver boards off one I²C adapter for synchronized multi-motor systems.
INDUSTRIES
Industries &
Applications
Our innovative piezoelectric motors are engineered to meet the diverse demands of various high-tech industries, providing precise and efficient motion control solutions that drive progress and innovation.
Photonics & Optics
Laser alignment, fiber positioning, beam steering, micro-mirror control.
Microscopy and Life Sciences
Sample scanning, precision focus control, confocal imaging, live-cell microscopy.
Medical Devices & Diagnostics
Wearable devices, portable diagnostics, analytical instrumentation.
Semiconductor Manufacturing
Wafer inspection, lithography alignment, die-level positioning.
Scientific Research
Spectroscopy, AFM, advanced optical experiments, quantum systems.
Embedded and Portable Instruments
Battery-operated systems requiring precision motion in minimal space.
Test & Measurement
Probe positioning, calibration systems, micro-alignment stages.
Scroll to Top